RTS RVON-C Manual do Utilizador descarregar pdf (Página 14)

Configuring the RVON-16 Card with AZedit

NOTE: RVONedit version 2.0.0 has more extensive configuration options for the RVON-16 card. For more information

on purchasing RVONedit 2.0.0, contact customer service at 1-800-392-3497.

Once the RVON-16 card is inserted into the intercom, AZedit will automatically recognize the card.

NOTE: Requires intercom firmware and AZedit software that supports RVON cards.

To configure the RVON-16 card, do the following:

CLOSED: Select RS-485 (for serial port 1)

OPEN (Default): Select RS-232 (for serial port 1)

Description: Selects either RS-485 or RS-232 operation on the debug/serial pass through port.

DIP Switch 10 Serial Port Select B

CLOSED: Select RS-485 (for serial port 2)

OPEN (Default): Select RS-232 (for serial port 2)

Description: Selects either RS-485 or RS-232 on the second debug/serial pass through port.

DIP Switches

11-15

Not Used.

Keep in Open position.

DIP Switch 16 Not Available

CLOSED: Not Connected

OPEN (Default): Not Connected

FIGURE 4. RVON-16 Switch Panels

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 48 49

Sem comentários

RTS RVON-C Manual do Utilizador Página 14