RTS XCP-48-RJ45 Manual do Utilizador descarregar pdf (Página 34)

6. Click Open.

The Download Device Firmware screen appears.

7. Click Begin Download.

The download begins.

8. Once the Download is finished, click OK.

The Cronus firmware download is complete. This will take a minute or two depending upon the type of connection

you use (network or serial).

9. Verify the version upgrade in the Master Controller Version Information window.

Finding the MAC Address for Cronus

To retrieve the MAC Address, do the following:

1. Open AZedit.

The Keypanels/Ports screen appears.

2. From the Options menu, select Communications.

The Communications screen appears.

3. Verify that USB is selected.

4. Click OK.

The Communications screen closes.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 106 107

Digital Intercom Matrix 1
Contents 3
POSSIBLE PITFALL WITH 4
TELCO BACKCARD 4
Introduction 7
Cronus Gain Structure 10
Specifications 11
Connections 11
DIP Switch Settings 14
Cronus from the inside 15
Cronus Menu Structure 19
Status, AZedit 21
Status Menu 21
Status, Crosspoints 22
Status, Frames 22
Status, GPI Input 22
Status, GPI Output 23
Status, Keypanels 23
Status, Links 23
Version, Intercom 23
Menu Access 24
Cronus and AZedit 25
Accessing Vox 26
Threshold 27
Download Cronus License File 30
Ethernet Setup for Cronus 31
Download Firmware for Cronus 33
Final Assembly Drawing 37
Final Assembly 38
FIGURE 43. Wiring Diagram 40
Features 42
J10, J11 44
Pin 1 44
RVON-C Backcard 45
RVON-C Backplate 45
J1 Serial 45
J2 Serial 45
Software Requirements 46
Switches and Connections 47
1. Open AZedit 60
6. Click Open 61
7. Click Begin Download 61
8. Click OK 61
RVON-C System Diagram 62
Basic Network Configuration 63
WIDE AREA NETWORK 64
TABLE 1. Packet Translation 65
Table 2. Packet Translation 66
IP ADDRESSES 67
Ping a Computer 68
3. Press Enter 69
RVON Configuration 70
Network Terminology 71
RVON-C Card 73
Serial Port Programming 73
RVON-C Boot Download 74
Access Serial Command Mode 76
Serial Command Table 77
TABLE 4. Serial Command Table 78
Codec Specifications 79
RVON-C Default Setup 80
RVON-C Quick Start 81
Configure the RVON-C Card 83
Breakout Panels 87
XCP-32-DB9 Breakout Panel 88
J3 17-24 89
J4 25-32 89
XCP-48-RJ45 Breakout Panel 90
XCP-48-Telco Breakout Panel 92
Telco Backcard 93
Telco Connector J1, J4 93
Cronus Master Controller Card 95
9030-7785-000 95
RVON Trunking Connections 99
Figure 12: RVON-16 Trunking 106

Comentários a estes Manuais

Sem comentários

RTS XCP-48-RJ45 Manual do Utilizador Página 34

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico RTS XCP-48-RJ45