RTS XCP-48-RJ45 Manual do Utilizador descarregar pdf (Página 32)

Ethernet Setup for Cronus

7. Click Begin Download.

The download begins.

8. Once the Download is finished, click OK.

The Cronus firmware download is complete. This will take a minute or two depending upon the type of connection you use

(network or serial).

9. Ver if y th e version upgrade in the Master Controller Version Information window.

Finding the MAC Address for Cronus

To get the MAC Address, do the following:

1. Open AZedit.

The Keypanels/Ports screen appears.

2. From the Options menu, select Communications.

The Communications screen appears.

3. Verify that USB is selected.

4. Click OK.

The Communications screen closes.

5. From the Options menu, select Ethernet Setup.

The Ethernet Setup screen appears. The MAC Address aappears at the bottom of the screen.

NOTE: If you have multiple Cronus systems linked together, you will need to individually connect them to the PC to see the

MAC address. You cannot look at multiple Cronus MAC Addresses at the same time.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Sem comentários

RTS XCP-48-RJ45 Manual do Utilizador Página 32