RTS XCP-48-RJ45 Manual do Utilizador descarregar pdf (Página 22)

The ADAM Intercom System can run both the AIO-8 and AIO-16 card in the same frame. You can position your AIO-8 and

AIO-16 cards in any slot or in any sequence within the ADAM frame. However, when mixing the AIO-8 and AIO-16 cards, it

is important to know the port numbering is consistent with the 2-tier port system. For example, in slots 1, 2, 3, and 4, you have

AIO-8 cards and in slot 5 you have an AIO-16 card. The port numbering scheme assigns eight (8) ports per card for the first

four (4) slots. When assigning ports to slot 5, the bottom group of ports are assigned in sequence with the AIO-8 cards;

however, the top group of ports associated with the AIO-16 card are assigned the corresponding ports with the card position.

This means ports 137 through 168 are unused and the top group of ports used by the AIO-16 card starts with port 169 (see

Figure 13).

Essentially, the port numbering is static. The port numbers do not change whether you are using an AIO-8 or an AIO-16 card.

FIGURE 13. ADAM frame with both AIO-8 and AIO-16 cards.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Sem comentários

RTS XCP-48-RJ45 Manual do Utilizador Página 22