RTS XCP-ADAM-MC Manual de Serviço descarregar pdf (Página 39)

3. Tap

PGM

displays.

5. Tap

PGM

→

displays. The arrow indicates that gating is now selected.

7. Tap

CLR

to exit.

8. Run "Service Menu, Save Cfg", page 44, to save the change.

Metering

Metering lets you use the

Vol.

display as an LED bar graph meter to monitor an audio signal for about 1

minute.

1. Tap

PGM

displays. Press

↓↓

↑↑

.to display any of the following items:

2. Tap

PGM

displays. Press

↓↓

↑↑

.to display any of the following items:

3. Tap

PGM

4. The

Vol.

bar graph is now monitoring the selected audio source.

5. Tap

CLR

to exit metering, or allow the metering function to timeout after about 1 minute.

Mixing

Mixing lets you route selected audio signals to the intercom system, to the speaker, or to the left or right

headphone when using a headset. By default, the microphone signal is routed to the matrix, and the matrix

signal is routed to the speaker and to the left and right headphones.

1. Tap

PGM

displays. Press

↓↓

↑↑

.to display any of the following items:

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Comentários a estes Manuais

Sem comentários

RTS XCP-ADAM-MC Manual de Serviço Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico RTS XCP-ADAM-MC