RTS XCP-ADAM-MC Manual de Serviço descarregar pdf (Página 40)

3. Tap

PGM

→

or d isplays. If an arrow displays, this indicates that the mic signal is currently being

routed to the destination that you selected in step 2. To toggle the selection, press

PGM

. You can also

press

↓↓

↑↑

.to display and toggle any of the following items:

5. Tap

CLR

to exit when you are finished changing the mixing selections.

6. Run Service Menu, Save Cfg, page 44, to store any mixing changes.

Service Menu, Hdst Sel

This item lets you select either the front panel headset jack or the headset connector on the optional rear

connector module. By default, the front panel jack is selected.

1. Select

, then tap

PGM

→

displays. The arrow indicates the default front panel jack is selected.

3. To change the selection, press

↓↓

displays.

5. Tap

PGM

→

displays. This indicates that the rear panel jack is now selected.

7. Tap

CLR

to exit.

8. Run Service Menu, Save Cfg, page 44, to store the new setting.

Service Menu, LCP-32

By default, each LCP-32 that you connect to the KP-32 takes control of level adjustment for the first

available group of 16 physical keys that it finds. The first LCP-32 adjusts keys 1-16, which corresponds to

the bottom row of keys on the KP-32; the second LCP-32 adjusts keys 17-32, and so forth (Figure 4). If

you do not want to use an LCP-32 with certain keys, you must program the KP-32 to skip those keys.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 57 58

Sem comentários

RTS XCP-ADAM-MC Manual de Serviço Página 40