RTS XCP-ADAM-MC Manual do Utilizador descarregar pdf (Página 11)

RVON-8 RTS™ Voice Over Network Card

Switches and Connections

Important: You must remove the card from the frame

in order to change any DIP switch settings.

Dip Switches

DIP Switch 1:

ON: Configuration via AZedit is disabled

OFF: (Default) Configuration via AZedit is enabled.

Description: Disables configuration changes via

AZedit. AZedit will still be able to view the card

configuration and connection status. The configura-

tion can still be changed via the serial and Telnet

connections.

DIP Switches 2-4.................................. unused

Keep in OFF position.

DIP Switch 5:

ON: Resets the Telnet username and password to

their default values:

User = Telex

Password = Password.

OFF: (Default)Uses current username and

password.

Description: Enables the user to reset the Telnet

username and password.

DIP Switch 6:

ON: Enables a serial monitor on back card DB9

(J2).

OFF: (Default) Enables a pass-through serial port

via the back card DB9 (J2)

Description: Selects DB9 (J2) serial configuration.

Figure 2. RVON-8 Dip Switch panel

DIP Switch 7:

ON: Runs the boot download

OFF: (Default) Runs the native flash program

Description: Switches to the boot download flash

program. This program is sent with the

RVON-8 card in case the native flash program

becomes corrupted.

DIP Switch 8: DEBUG ONLY!

WARNING

: Dip switch 8 should always be left in the

OFF position. It is reserved for debugging and can

have unintended consequences.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Comentários a estes Manuais

Sem comentários

RTS XCP-ADAM-MC Manual do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico RTS XCP-ADAM-MC