RTS XCP-ADAM-MC Manual do Utilizador descarregar pdf (Página 40)

Following the power-ON messages, press Return.

The -> appears. This is the operating system prompt.

There are many different serial port commands supported from here, but it is

NOT recommended that any be used EXCEPT:

d/jointfilesconvert/458974/bgcmd

Type “d/jointfilesconvert/458974/bgcmd”, then press Return.

This places the serial port into the MXP> (MXP command mode)

The MXP Command Mode is the only mode that will be used. Table 1 is a list of

commands supported from the MXP Shell Prompt.

Table 1: Command Table

Command Variable1 Variable2 Description

set rvon Help screen which lists all “set rvon”

commands

set rvon ip_addr X.X.X.X Set the IP address for the RVON-8

Card

set rvon netmask X.X.X.X Set the network mask for the RVON-8

Card

set rvon gateway X.X.X.X Set the gateway IP address for the

RVON-8 Card

set rvon serial_ip X.X.X.X Set the pass-thru serial port IP

address for the RVON-8 Card

set rvon serial_baud X Set the pass-thru serial port baud rate

for the RVON-8 Card

set rvon user abcdefg Set the RVON-8 user name for telnet

access

Default ”telex”

set rvon password abcdefg Set the RVON-8 password for telnet

access (8-40 characters)

Default “password”

set rvon

vad_threshold

[adaptive |#]

Set the VAD threshold (silence

dectection) Adaptive refers to auto-

select. The # can be –20 to +10 dBm.

set channel [chan] Help screen which lists all “set tcid”

commands (TCID 0-7)

set channel [chan] dest_ip X.X.X.X Set the destination IP address for this

particular RVON_Channel (same as

tcid)

set channel [chan] dest_type X dest_type X = 0(rvon-8) 1(rvon-1)

2(rvon-10),

set channel [chan] dest_chan X Set the destination channel – what

port of far-end (0-7)

set channel [chan] chan_codec X Set the profile to use which includes

the compression codec see below (0-

27)

set channel [chan] onhook Force the channel to disconnect the

port

1 2 ... 35 36 37 38 39 40 41 42

Comentários a estes Manuais

Sem comentários

RTS XCP-ADAM-MC Manual do Utilizador Página 40

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico RTS XCP-ADAM-MC