RTS DV-3400 Informações Técnicas descarregar pdf (Página 130)

100

101

Switch Memory and Configuration

Using Primary and Secondary Flash Image Options

Using the Fastboot feature. The fastboot command allows a boot

sequence that skips the internal power-on self-tests, resulting in a faster boot

time.

Syntax: [no] fastboot

Enables the fastboot option

[no]: disables the feature.

Syntax: show fastboot

Shows the status of the fastboot feature, either enabled or

disabled.

The fastboot command is shown below.

ProCurve(config)# fastboot

Figure 6-14. Example of the Fastboot Command

Rebooting from the Current Software Version. Reload reboots the

switch from the flash image and startup-config file on which the switch is

currently running, and provides the option for saving to the startup-config file

any configuration changes currently in the running-config file. Because reload

bypasses some subsystem self-tests, the switch reboots faster than if you use

either of the boot command options.

Syntax: reload

For example, if you change the number of VLANs the switch supports, you

must reboot the switch in order to implement the change. Reload automati-

cally saves your configuration changes and reboots the switch from the same

software image you have been using:

Figure 6-15. Using Reload with Pending Configuration Changes

6-20

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 130

Comentários a estes Manuais