RTS DV-3400 Informações Técnicas descarregar pdf (Página 458)

100

101

File Transfers

Transferring Switch Configurations and ACL Command Files

Syntax: copy xmodem startup-config < pc | unix >

copy xmodem config < filename > < pc | unix >

All Switches: Copies a configuration file from a serially

connected PC or UNIX workstation to the switch’s startup-

config file.

5300xl and 4200vl: 5300xl switches running software release

E.09.xx or greater, and 4200vl switches, copy a

configuration file from a serially connected PC or UNIX

workstation to a designated configuration file on the switch.

For more on multiple configuration files, refer to “Multiple

Configuration Files on 5300xl and 4200vl Switches” on page

6-22.

For example, to copy a configuration file from a PC serially connected to the

switch:

1. Execute the following command:

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

4. When the download finishes, you must reboot the switch to implement

the newly downloaded software. To do so, use one of the following

commands:

Syntax: boot system flash [ primary | secondary ]

boot system flash [ config < filename >

All Switches: Boots from the selected flash.

5300xl and4200vl: 5300xl switches running software release

E.09.xx or greater, and 4200vl switches, boot from the

designated configuration file. For more on multiple

configuration files, see “Multiple Configuration Files on

5300xl and 4200vl Switches” on page 6-22.

Syntax:

reload

Reboots from the flash image currently in use.

(For more on these commands, see “Rebooting the Switch” on page 6-18.)

A-28

1 2 ... 453 454 455 456 457 458 459 460 461 462 463 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 458

Comentários a estes Manuais