RTS DV-3400 Informações Técnicas descarregar pdf (Página 312)

100

101

Port Trunking

Trunk Group Operation Using LACP

Static LACP Provides a manually configured, static LACP trunk to accommodate these conditions:

LACP Port Trunk

Configuration

Operation

• A static LACP trunk will work with a dynamic LACP trunk. The VLAN membership of a dynamic trunk

will be VLAN 1; the static LACP trunk should also be a member of VLAN 1. (Static trunks can be

configured to be a member of another VLAN.)

• You want to configure non-default spanning tree or IGMP parameters on an LACP trunk group.

• You want an LACP trunk group to operate in a VLAN other than the default VLAN and GVRP is

disabled. (Refer to “VLANs and Dynamic LACP” on page 13-23.)

• You want to use a monitor port on the switch to monitor an LACP trunk.

The following operations are supported:

• Dynamic LACP <Active | Passive > to Static LACP

• Dynamic LACP Active to Dynamic LACP Active

NOT supported is:

• Dynamic LACP <Active | Passive> to <Trunk>

(The table on page 13-4 lists the maximum number of trunk groups allowed on switches covered by this

guide.)

Displaying Static LACP Trunk Data: To list the configuration and status for a static LACP trunk, use the

CLI

show lacp command. To list a static LACP trunk with its assigned ports, use the CLI show trunk

command or display the menu interface Port/Trunk Settings screen.

Static LACP does not allow standby ports.

Default Port Operation

For the Series 4200vl switches, LACP is turned off by default. For the Series

5300xl, 3400lcl, and 6400cl switches, all ports are configured for passive LACP

by default.

When LACP is turned on, if LACP is not configured as Active on at least one

end of a link, then the port does not try to detect a trunk configuration and

operates as a standard, untrunked port. Table 13-5 lists the elements of per-

port LACP operation. To display this data for a switch, execute the following

command in the CLI:

ProCurve> show lacp

13-20

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 312

Comentários a estes Manuais