RTS DV-3400 Informações Técnicas descarregar pdf (Página 247)

100

101

Power Over Ethernet (PoE) Operation for the Series 5300xl Switches

Configuring PoE Operation

1. Use the walkmib pethPsePortType.< slot-# > command to determine the

MIB-based port number for the port to which you want to assign a

Configured Type identifier. On the 5300xl switches the slot numbering is as

follows:

Slot Slot Number

Used in the MIB

A 1

B 2

C 3

D 4

E* 5

F* 6

G* 7

H* 8

*5308xl only.

Note that in the MIB, 26 port numbers are assigned to each slot designa-

tion. Thus, for example, with PoE modules in slots “A” and “B”, the actual,

corresponding port numbers will be 1-24 and 27-50, respectively. (The port

numbers “25”, “26”, “51”, and “52” are reserved.)

2. Use the setmib pethPsePortType.< slot-# >.< port-# > -D < identifier-string >

command to configure the identifier you want for a specific port.

For example, suppose that you have a PoE xl Module installed in slot B and

want to assign the identifier “Wireless-1” to port 1 in this slot. To do so, you

would use the following commands:

11-13

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 247

Comentários a estes Manuais