RTS DV-3400 Informações Técnicas descarregar pdf (Página 273)

100

101

Access Controller xl Module for the Series 5300xl Switches

Using 5300xl Features with the Access Controller xl Module

Downlink client ports must be members of some other VLAN before they can

be removed from a client VLAN. If you use the no access-controller <slot-id>

client-ports [e] <port-list> command to remove an untagged downlink client

port with no other VLAN memberships from a client VLAN, the port is

automatically placed in the DEFAULT-VLAN as an untagged member. If you

attempt to remove a tagged downlink client port that belongs to no other

VLAN, the removal fails. Add the port to another VLAN, then delete it from the

client VLAN.

Client VLANs can be configured without specifying any switch ports using the

access-controller <slot-id> client-ports vlan <vlan-list> command from the con-

figuration context. The VLANs are created with only the downlink port,

<slot-id>DP, as a tagged member. Later you can use VLAN commands from the

5300xl CLI to add switch ports to this VLAN as downlink client ports.

Static VLAN Features Supported on Client VLANs

Client VLANs are special and they don’t support all of the features of a regular

5300xl static VLAN. Table 12-9-1 below outlines the feature limitations of client

VLANs.

Table 9-1. 5300xl Static VLAN Features on Client VLANs

5300xl Static VLAN Feature Client VLAN Support

ACLs Do not work. A warning issued.

IGMP Not allowed.

IP Address Not allowed.

IP Helper Address Not allowed.

IRDP Not allowed.

Management VLAN A client VLAN may not be used.

Multicast routing Not allowed.

OSPF Not allowed.

PIM Not allowed.

Primary VLAN A client VLAN may not be used.

Protocol VLAN A client VLAN may not be used.

RIP Not allowed.

XRRP Not allowed.

12-13

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 273

Comentários a estes Manuais