RTS DV-3400 Informações Técnicas descarregar pdf (Página 373)

100

101

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

Syntax: snmp-server host < community-string > < ip-address >

Using community name and destination IP address, this

command designates a destination network-

management station for receiving SNMP event log

messages from the switch. If you do not specify the event

level, then the switch does not send event log messages

as traps. You can specify up to 10 trap receivers (network

management stations).

Note: In all cases, the switch sends any threshold trap(s)

to the network management station(s) that explicitly set

the threshold(s).

[<none | all | non-info | critical | debug>]

Options for sending switch Event Log messages to a trap

receiver. Refer toTable 15-1, “Options for Sending Event

Log Messages as Traps,” on page 15-21. The levels

specified with these options apply only to Event Log

messages, and not to threshold traps.

Table 15-1. Options for Sending Event Log Messages as Traps

Event Level Description

None (default) Send no log messages.

All Send all log messages.

Not INFO Send the log messages that are not information-only.

Critical Send critical-level log messages.

Debug Reserved for ProCurve-internal use.

For example, to configure a trap receiver in a community named "red-team"

with an IP address of 10.28.227.130 to receive only "critical" log messages:

ProCurve(config)# snmp-server trap-receiver red-team

10.28.227.130 critical

15-21

1 2 ... 368 369 370 371 372 373 374 375 376 377 378 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 373

Comentários a estes Manuais