RTS DV-3400 Informações Técnicas descarregar pdf (Página 302)

100

101

Port Trunking

Menu: Viewing and Configuring a Static Trunk Group

• For proper trunk operation, all ports in a trunk must have the same

media type and mode (such as 10/100TX set to 100FDx, or 100FX set

to 100FDx). The flow control settings must also be the same for all

ports in a given trunk. To verify these settings, see “Viewing Port

Status and Configuring Port Parameters” on page 10-2.

• You can configure the trunk group with up to eight ports per trunk. If

multiple VLANs are configured, all ports within a trunk will be

assigned to the same VLAN or set of VLANs. (With the 802.1Q VLAN

capability built into the switch, more than one VLAN can be assigned

to a trunk. Refer to the chapter titled “Static Virtual LANs (VLANs)”

in the Advanced Traffic Management Guide for your switch.)

(To return a port to a non-trunk status, keep pressing the Space bar

until a blank appears in the highlighted Group value for that port.)

Figure 13-5. Example of the Configuration for a Two-Port Trunk Group

6. Move the cursor to the Type column for the selected port and use the

Space bar to select the trunk type:

– LACP

– Trunk (the default type if you do not specify a type)

All ports in the same trunk group on the same switch must have the same

Type (LACP or Trunk.

13-10

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 302

Comentários a estes Manuais