RTS DV-3400 Informações Técnicas descarregar pdf (Página 281)

100

101

Access Controller xl Module for the Series 5300xl Switches

Configuring the Access Controller xl Module

Syntax: [no] access-controller <slot-id> client-ports [ethernet] < port-list >

Assigns switch ports (port-list) to separate client

VLANs for the access controller in slot-id (a - h). The

ports are removed from all other VLANs. GVRP and

LACP port provisioning are disabled.

The client VLAN has the following port membership:

the switch port, as an untagged member, and the ACM’s

downlink port (<slot-id>DP), as a tagged member.

The vlan-base VID is configured when the ACM is

installed in the switch. By default, this is VLAN 2000,

whose only member is the downlink port. The very first

time this command is used, the first switch port con-

figured becomes a member of client VLAN vlan-base

VID. For example, by default, the first time this com-

mand is used to assign a switch port to a client VLAN

it becomes an untagged member of VLAN 2000. The

next client VLAN configured takes the next available

sequential VID, starting from the vlan-base.

Use the no form of the command to remove downlink

client ports from ALL client VLANs associated with

the module in <slot-id>. If the removed port has no

other VLAN memberships it is automatically placed in

the DEFAULT VLAN as an untagged member.

If a client VLAN that contained the removed port was

configured using an access-controller <slot-id> cli-

ent-ports [ethernet] < port-list > command and the

ACM’s downlink port is the only remaining member,

the client VLAN is also removed.

The no form of this command does not remove a client

VLAN configured using the access-controller <slot-

id> client-ports vlan < vlan-list > command.

12-21

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 281

Comentários a estes Manuais