RTS DV-3400 Informações Técnicas descarregar pdf (Página 268)

100

101

Access Controller xl Module for the Series 5300xl Switches

Using 5300xl Features with the Access Controller xl Module

Note 5300xl switch ports that are not used by the Access Controller xl Module (that

is, they are not downlink client ports, or members of client VLANs) continue

to operate as regular 5300xl ports. Their operation is not affected.

The table below presents the 5300xl switch features that are not supported

for use with an ACM module.

Feature

Downlink Client Ports

Explanation

802.1X

Uplink Port

Downlink Port

x x

Client VLANs

Not allowed.

ACL x Has no effect if assigned. Warning issued

Configuring IP x Not allowed.

Addresses

DHCP/DHCP Relay x Not allowed.

IP Helper Address x Not allowed.

Flow Control Not supported across an ACM.

GVRP x x x x GVRP cannot be enabled on an uplink,

downlink, or downlink client port.

A port in a GVRP VLAN cannot be added to

a client VLAN.

If GVRP is enabled on a port when it is

added to a client VLAN, it is disabled.

IGMP x x x IGMP cannot be enabled on client

VLANs.As a result, it cannot be enabled on

downlink client ports.

Interface Monitoring x x x Cannot be used as a monitoring port.

(Port Mirroring)

Interface Provisioning:

Speed

Fixed at 1000Mbps.

Duplex

Fixed at Full-Duplex.

Flow-Control

Not allowed.

Auto-MDIX mode

Not allowed.

‘x’ indicates that the feature is not supported.

12-8

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 579 580

Comentários a estes Manuais

Sem comentários

RTS DV-3400 Informações Técnicas Página 268

Comentários a estes Manuais